![]() The locking system has to be properly aligned to ensure proper operation of the system. Higher installation charges compare to the EM lock to mount the lock and strike plate. The lock will protrude from the top door frame or the LZ bracket.Ī door closer mechanism has to be installed onto the door system to ensure that proper alignment of the lock and the strike plate. The doors on which the locks are installed can only be opened in one direction, which is either inwards or outwards only. The doors can open in both inward and outward directions.Įxisting locking mechanism can be used and this is important if the user has a preference to the design of the existing lock which has been installed at the doors. The electric drop bolt will not retract unless the push button is triggered or the emergency break-glass switch is activated, hence it is a very secured locking system. This is a preferred system for glass doors and glass doorframes. ![]() ![]() The lock is mounted flush into or onto the frame with nothing protruding outwards. The system can be easily replaced hence the access control system will experience very limited down time due to equipment failure. It is easy to install compared to the other two systems, hence lower installation charges. Low mantainence as there are no moving parts on the locking system. When electricity power is applied to the door strike system, it functions as an ordinary door locking plate to secure the door lock (on a permanent locked position) the door strike disengages itself to enable the door to be pushed open when there is a power failure or when the emergency break-glass switch is activated. The electric door strike system replaces the locking plate on the existing door locking system. The electric drop bolt is designed to retract during a power failure or when the emergency break-glass switch is activated. Optional brackets are available for installers to mount the system on different types of doors. When the electricity power is applied, a bolt protrudes from the lock and lodges itself into the strike plate which is mounted on the door frame. The Electric Drop Bolt System consists of a locking system which can be installed either on the floor or on the top of the door frame. In addition to that the emergency break-glass switch is provided to enable the indoor users to release the locking mechanism to ensure that there are no unnecessary lock-ins occurrances.The designs and type of electromagnetic locking systems varies with the type and usage of the doors on which they are installed. The system has a built-in safety feature which will disable the lock during emergencies. The electromagnet locks uses the magnetic force generated from the electromagnet to secure the doors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |